Innodisk M.2 (S42) 3ME3 (MLC)

Innodisk M.2 (S42) 3ME3 is designed as the standard M.2 form factor with SATA interface, and supports SATA III standard (6.0Gb/s) with excellent performance. The form factor refers to the M.2(NGFF) specification which established by JEDEC. Regarding of mechanical interference, Innodisk M.2 (S42) 3ME3 absolutely replaces the traditional hard disk and makes personal computer, in any field, smaller and easier.

Innodisk M.2 (S42) 3ME3 effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device.

Current status: Available

Technical features

Data Integrity
Data Integrity
Life Time Montitoring
Life Time Montitoring
MLC
MLC
Shock and Vibration
Shock and Vibration
Supply Longevity
Supply Longevity

Related services

Conformal Coating
Conformal Coating
Content Upload
Content Upload
Controlled BOM
Controlled BOM
Customisation
Customisation
Just In Time
Just In Time
Obsolesence Management
Obsolesence Management

Innodisk M.2 (S42) 3ME3 is designed as the standard M.2 form factor with SATA interface, and supports SATA III standard (6.0Gb/s) with excellent performance. The form factor refers to the M.2(NGFF) specification which established by JEDEC. Regarding of mechanical interference, Innodisk M.2 (S42) 3ME3 absolutely replaces the traditional hard disk and makes personal computer, in any field, smaller and easier.

Innodisk M.2 (S42) 3ME3 effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device.

  • SATA 6Gb/s interface
  • iSMART disk health monitoring
  • Intelligent error recovery system
  • Excellent data transfer speed
  • Write protection security
  • Zero mechanical interference
  • Anti-vibration mechanical design
NAND Flash

MLC

Capacity

4GB, 8GB, 16GB, 32GB, 64GB

Interface

SATA III (6.0 Gbps)

Form Factor

M.2

Operating Temperature

Standard 0°C to +70°C, Wide -40°C to +85°C

Power Protection

No

Max Sequential Read / Write

300 / 70MB/s

Connector

67 Pin (S42)

Max Power Consumption

0.5W (3.3V x 150 mA)

Hardware Write Protect

No

DRAM Buffer

No

TRIM

Yes

ATA Security

Yes

S.M.A.R.T

Yes

Dimensions in mm (W x L x H)

22.0 x 42.0 x 4.5

Environmental

Humidity 10% to 95% non-condensing, MTBF 3 Million Hours, Shock 0.5ms Duration 1500G, Vibration 7 Hz to 2K Hz 20G 3 axes

Certifications

CE, REACH, RoHS, WEEE

Warranty

2 Years

Capacity 0°C to +70°C -40°C to +85°C
8GB DEM24-08GD09SC1SC DEM24-08GD09SW1SC
16GB DEM24-16GD09SC1DC DEM24-16GD09SW1DC
32GB DEM24-32GD09SC1DC DEM24-32GD09SW1DC
64GB DEM24-64GD09SC1DC DEM24-64GD09SW1DC
128GB DEM24-A28D09SCADC DEM24-A28D09SWADC

Product Enquiry