Innodisk M.2 (S42) 3SE (SLC)

Innodisk M.2 (S42) 3SE is designed as the standard M.2 form factor with SATA interface, and supports SATA III standard (6.0Gb/s) with excellent performance. The form factor refers to the M.2(NGFF) specification which established by JEDEC. Regarding of mechanical interference, Innodisk M.2 (S42) 3SE absolutely replaces the traditional hard disk and makes personal computer, in any field, smaller and easier.

Innodisk M.2 (S42) 3SE effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device.

Current status: Available

Technical features

Data Integrity
Data Integrity
Life Time Montitoring
Life Time Montitoring
Shock and Vibration
Shock and Vibration
SLC
SLC
Supply Longevity
Supply Longevity

Related services

Conformal Coating
Conformal Coating
Content Upload
Content Upload
Controlled BOM
Controlled BOM
Customisation
Customisation
Just In Time
Just In Time
Obsolesence Management
Obsolesence Management

Innodisk M.2 (S42) 3SE is designed as the standard M.2 form factor with SATA interface, and supports SATA III standard (6.0Gb/s) with excellent performance. The form factor refers to the M.2(NGFF) specification which established by JEDEC. Regarding of mechanical interference, Innodisk M.2 (S42) 3SE absolutely replaces the traditional hard disk and makes personal computer, in any field, smaller and easier.

Innodisk M.2 (S42) 3SE effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device

  • SATA 6Gb/s interface
  • iSMART disk health monitoring
  • Intelligent error recovery system
  • Excellent data transfer speed
  • Zero mechanical interference
  • Anti-vibration mechanical design
NAND Flash

SLC

Capacity

4GB, 8GB, 16GB, 32GB

Interface

SATA III (6.0 Gbps)

Form Factor

M.2

Operating Temperature

Standard 0°C to +70°C, Wide -40°C to +85°C

Power Protection

No

Max Sequential Read / Write

290 / 130MB/s

Connector

67 Pin (S42)

Max Power Consumption

1.2 W (3.3V x 366 mA )

DRAM Buffer

No

TRIM

No

ATA Security

Yes

S.M.A.R.T

Yes

Dimensions in mm (W x L x H)

22.0 x 42.0 x 3.5

Environmental

Humidity 10% to 95% non-condensing, MTBF 3 Million Hours, Shock 0.5ms Duration 1500G, Vibration 7 Hz to 2K Hz 20G 3 axes

Certifications

CE, REACH, RoHS, WEEE

Warranty

5 Years

Capacity 0°C to +70°C -40°C to +85°C
4GB DEM24-04GD07SCADB DEM24-04GD07SWADB
8GB DEM24-08GD07SCADB DEM24-08GD07SWADB
16GB DEM24-16GD07SCADB DEM24-16GD07SWADB
32GB DEM24-32GD07SCADB DEM24-32GD07SWADB

Product Enquiry