Innodisk mSATA mini 3SE (SLC)

Innodisk mSATA mini 3SE is designed as the standard Mini PCIe form factor with SATA interface, and supports SATA III standard (6.0Gb/s) with excellent performance. The form factor refers to the MO-300 / MO-300B specification which established by JEDEC. Regarding of mechanical interference, InnoDisk mSATA mini 3ME absolutely replaces the traditional hard disk and makes personal computer, in any field, smaller and easier.

Innodisk mSATA mini 3SE effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device.

Current status: Available

Technical features

Data Integrity
Data Integrity
Life Time Montitoring
Life Time Montitoring
Shock and Vibration
Shock and Vibration
SLC
SLC

Related services

Conformal Coating
Conformal Coating
Content Upload
Content Upload
Controlled BOM
Controlled BOM
Customisation
Customisation
Just In Time
Just In Time
Obsolesence Management
Obsolesence Management

Innodisk mSATA mini 3SE is designed as the standard Mini PCIe form factor with SATA interface, and supports SATA III standard (6.0Gb/s) with excellent performance. The form factor refers to the MO-300 / MO-300B specification which established by JEDEC. Regarding of mechanical interference, Innodisk mSATA mini 3SE absolutely replaces the traditional hard disk and makes personal computer, in any field, smaller and easier.

Innodisk mSATA mini 3SE effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device.

  • SATA 6Gb/s interface
  • iSMART disk health monitoring
  • Intelligent error recovery system
  • Excellent data transfer speed
  • Zero mechanical interference
  • Anti-vibration mechanical design
  • JEDEC standard MO-300 dimension
NAND Flash

SLC

Capacity

1GB, 2GB, 4GB, 8GB, 16GB

Interface

SATA III (6.0 Gbps)

Form Factor

mSATA mini

Operating Temperature

Standard 0°C to +70°C, Wide -40°C to +85°C

Power Protection

No

Max Sequential Read / Write

300 / 130MB/s

Connector

52 Pin mini PCIe (mSATA)

Max Power Consumption

0.5W (3.3V x 150 mA)

DRAM Buffer

No

TRIM

No

ATA Security

Yes

S.M.A.R.T

Yes

Dimensions in mm (W x L x H)

30.0 x 26.8 x 3.7

Environmental

Humidity 10% to 95% non-condensing, MTBF 3 Million Hours, Shock 0.5ms Duration 1500G, Vibration 7 Hz to 2K Hz 20G 3 axes

Certifications

CE, REACH, RoHS, WEEE

Warranty

5 Years

Capacity 0°C to +70°C  -40°C to +85°C 
1GB DEMSM-01GD07AC1SB DEMSM-01GD07AW1SB
2GB DEMSM-02GD07AC1DB DEMSM-02GD07AW1DB
4GB DEMSM-04GD07SCADB DEMSM-04GD07SWADB
8GB DEMSM-08GD07SCADB DEMSM-08GD07SWADB
16GB DEMSM-16GD07SCADB DEMSM-16GD07SWADB
32GB DEMSM-32GD07SCADB DEMSM-32GD07SWADB

 

Product Enquiry