Innodisk SATADOM-MH 3SE (SLC)

Innodisk Serial ATA Disk on Module (SATADOM) supports SATA III standard (6.0Gb/s) interface with excellent performance, and SATADOM-MH 3SE is designed as the smallest form factor size that could enhance compatibility with various design applications. Particularly the 7th pin of standard SATA 7pin connector can optionally be the built-in power VCC pin.

Innodisk SATADOM-MH 3SE effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device.

Current status: Available

Technical features

Data Integrity
Data Integrity
Life Time Montitoring
Life Time Montitoring
Shock and Vibration
Shock and Vibration
SLC
SLC
Supply Longevity
Supply Longevity

Related services

Conformal Coating
Conformal Coating
Content Upload
Content Upload
Controlled BOM
Controlled BOM
Customisation
Customisation
Just In Time
Just In Time
Obsolesence Management
Obsolesence Management

the Innodisk SATADOM-MH 3SE (SLC) supports SATA III standard (6.0Gb/s) interface with excellent performance, and SATADOM-MH 3SE is designed as the smallest form factor size that could enhance compatibility with various design applications. Particularly the 7th pin of standard SATA 7pin connector can optionally be the built-in power VCC pin. In other words, it could be connected directly to the SATA on-board socket on customers’ system without additional power cable.

Besides, the booting time for operation and the power consumption is less than hard disk drive (HDD). SATADOM-MH 3SE can work under harsh environment compile with ATA protocol, no additional drives are required, and the SSD can be configured as a boot device or data storage device.

  • SATA 6Gb/s interface
  • iSMART disk health monitoring
  • Intelligent error recovery system
  • Excellent data transfer speed
  • Zero mechanical interference
  • Anti-vibration mechanical design
  • Built-in Pin7 VCC
NAND Flash

SLC

Capacity

4GB, 8GB, 16GB, 32GB

Interface

SATA III (6.0 Gbps)

Form Factor

Disk on Module, Disk on Module Horizontal

Operating Temperature

Standard 0°C to +70°C, Wide -40°C to +85°C

Power Protection

No

Max Sequential Read / Write

260 / 130MB/s

Connector

7pin SATA

Max Power Consumption

1.8W (5V x 360mA)

Hardware Write Protect

No

Pin7 Power Support

Yes (Optional)

DRAM Buffer

No

TRIM

No

ATA Security

Yes

S.M.A.R.T

Yes

Dimensions in mm (W x L x H)

40.0 x 30.0 x 9.0

Environmental

Humidity 10% to 95% non-condensing, MTBF 3 Million Hours, Shock 0.5ms Duration 1500G, Vibration 7 Hz to 2K Hz 20G 3 axes

Certifications

CE, REACH, RoHS, WEEE

Warranty

5 Years

Capacity 0°C to +70°C -40°C to +85°C
4GB DESMH-04GD07SCADB DESMH-04GD07SWADB
4GB (Pin7 VCC) DESMH-04GD07SCADBF DESMH-04GD07SWADBF
8GB DESMH-08GD07SCADB DESMH-08GD07SWADB
8GB (Pin7 VCC) DESMH-08GD07SCADBF DESMH-08GD07SWADBF
16GB DESMH-16GD07SCADB DESMH-16GD07SWADB
16GB (Pin7 VCC) DESMH-16GD07SCADBF DESMH-16GD07SWADBF
32GB DESMH-32GD07SCADB DESMH-32GD07SWADB
32GB (Pin7 VCC) DESMH-32GD07SCADBF DESMH-32GD07SWADBF

Product Enquiry