SATADOM-SH (Type C) 3SE Series (SLC)

Innodisk SATADOM-SH Type C 3SE is designed as the standard SATA 7 pin connector with SATA interface, and supports SATA III standard (6.0Gb/s) with excellent performance. It has opposite angle compare to SATADOM-SH, and able to fulfill different motherboard (SATA port) design.
Innodisk SATADOM-SH Type C 3SE effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device.

Current status: Available

Technical features

Data Integrity
Data Integrity
Life Time Montitoring
Life Time Montitoring
Power Failure Protection
Power Failure Protection
Secure Erase
Secure Erase
Shock and Vibration
Shock and Vibration
SLC
SLC
Supply Longevity
Supply Longevity

Related services

Content Upload
Content Upload
Customisation
Customisation
Just In Time
Just In Time
Obsolesence Management
Obsolesence Management

– SATA 6Gb/s interface
– iSMART disk health monitoring
– Intelligent error recovery system
– Excellent data transfer speed
– Zero mechanical interference
– Anti-vibration mechanical design

Capacity Standard Grade (0°C ~ +70°C) Industrial Grade (-40°C ~ +85°C) 
1GB DESSC-01GD07AC1SB(F) DESSC-01GD07AW1SB
2GB DESSC-02GD07AC1SB DESSC-02GD07AW1SB
4GB DESSC-04GD07SCADB DESSC-04GD07SWADB
8GB DESSC-08GD07SCADB DESSC-08GD07SWADB
16GB DESSC-16GD07SCADB DESSC-16GD07SWADB
32GB DESSC-32GD07SCADB DESSC-32GD07SWADB

 

 

Capacity Standard Grade (0°C ~ +70°C) Industrial Grade (-40°C ~ +85°C) 
1GB DESSC-01GD07AC1SBF DESSC-01GD07AW1SBF
2GB DESSC-02GD07AC1SBF DESSC-02GD07AW1SBF
4GB DESSC-04GD07SCADBF DESSC-04GD07SWADBF
8GB DESSC-08GD07SCADBF DESSC-08GD07SWADBF
16GB DESSC-16GD07SCADBF DESSC-16GD07SWADBF
32GB DESSC-32GD07SCADBF DESSC-32GD07SWADBF

Above Part numbers with Pin7 VCC

NAND Flash

SLC

Capacity

1GB, 2GB, 4GB, 8GB, 16GB, 32GB

Interface

SATA III (6.0 Gbps)

Form Factor

Disk on Module, Disk on Module Vertical

Max Sequential Read / Write

300 / 130 (MB/sec, max.)

Max Power Consumption

0.6 W (5V x 130 mA )

ATA Security

Yes

S.M.A.R.T

Yes

Dimensions in mm (W x L x H)

18.0 x 30.3 x 12.5

Environmental

MTBF 3 Million Hours, Shock 0.5ms Duration 1500G, Vibration 7 Hz to 2K Hz 20G 3 axes

Warranty

5 Years

Product Enquiry