Innodisk 3MG2-P M.2 (S80) (MLC)

Innodisk M.2 (S80) 3MG2-P is designed as the standard M.2 form factor with SATA interface, and supports SATA III standard (6.0Gb/s) with excellent performance. The form factor refers to the M.2(NGFF) specification which established by JEDEC. Regarding of mechanical interference, Innodisk M.2 (S80) 3MG2-P absolutely replaces the traditional hard disk and makes personal computer, in any field, smaller and easier.

Innodisk M.2 (S80) 3MG2-P effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device

Current status: Available

Technical features

Data Integrity
Data Integrity
MLC
MLC
Shock and Vibration
Shock and Vibration
Supply Longevity
Supply Longevity

Related services

Conformal Coating
Conformal Coating
Content Upload
Content Upload
Controlled BOM
Controlled BOM
Customisation
Customisation
Just In Time
Just In Time
Obsolesence Management
Obsolesence Management

Innodisk M.2 (S80) 3MG2-P is designed as the standard M.2 form factor with SATA interface, and supports SATA III standard (6.0Gb/s) with excellent performance. The form factor refers to the M.2(NGFF) specification which established by JEDEC. Regarding of mechanical interference, Innodisk M.2 (S80) 3MG2-P absolutely replaces the traditional hard disk and makes personal computer, in any field, smaller and easier.

Innodisk M.2 (S80) 3MG2-P effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device

NAND Flash

Capacity

, , , , , ,

Interface

Form Factor

Operating Temperature

,

Power Protection

Max Sequential Read / Write

Connector

Max Power Consumption

DRAM Buffer

TRIM

ATA Security

S.M.A.R.T

Dimensions in mm (W x L x H)

Environmental

, , ,

Certifications

, , ,

Warranty

Product Enquiry

  • SATA III solution for industrial field
  • iSMART disk health monitoring
  • Intelligent error recovery system
  • Excellent data transfer speed
  • Write protection security
  • Zero mechanical interference
  • Anti-vibration mechanical design
Capacity Toshiba 15nm Sync. NAND (0°C to +70°C) Toshiba 15nm Sync. NAND (-40°C to +85°C) Synchronous NAND  (0°C to +70°C) Synchronous NAND  (-40°C to +85°C)
16GB N/A N/A DGM28-16GD81SCASN DGM28-16GD81SWASN 
32GB DGM28-32GD81BCBDC DGM28-32GD81BWBDC DGM28-32GD81SCADN DGM28-32GD81SWADN 
64GB DGM28-64GD81BCBQC DGM28-64GD81BWBQC  DGM28-64GD81SCAQN DGM28-64GD81SWAQN 
128GB DGM28-A28D81BCBQC DGM28-A28D81BWBQC  DGM28-A28D81SCAQN DGM28-A28D81SWAQN 
256GB DGM28-B56D81BCBQC DGM28-B56D81BWBQC  DGM28-B56D81SCAQN DGM28-B56D81SWAQN 
512GB DGM28-C12D81BCBQC DGM28-C12D81BWBQC  DGM28-C12D81SCAQN DGM28-C12D81SWAQN
1TB DGM28-01TD81BCBQC DGM28-01TD81BWBQC N/A N/A

3MG2-P M.2 S80 with iCell (non AES)

Capacity

Standard Temp (0°C to +70°C)

 Industrial Temp. (-40°C to +85°C)

64GB

DGM28-64GD81BCBQCP

DGM28-64GD81BWBQCP

128GB

DGM28-A28D81BCBQCP

DGM28-A28D81BWBQCP

256GB

DGM28-B56D81BCBQCP

DGM28-B56D81BWBQCP

512GB

DGM28-C12D81BCBQCP

DGM28-C12D81BWBQCP