|Max Sequential Read / Write|
|Hardware Write Protect|
ATP A600Sc CFast (MLC)
With the more advanced SATA interface, the ATP Industrial Grade CFast is the ideal replacement for CompactFlash. The CFast is fully compliant with CFA’s CFast specification version 2.0 with a SATA 6 Gb/s interface as well as back compatible with 3 / 1.5 Gb/s interface rate with MLC products.
The new CFast specification, a combination of CF and ATA serial Transport (AST), is recommended as new boot and storage device in embedded and industrial markets. These markets include military/aerospace, automation, marine navigation, embedded system, telecommunication equipment/networking and medical equipment where mission-critical data requires the highest level of reliability, durability, and data integrity.
The ATP CFast with PowerProtector guarantees reliable controller and lasting NAND flash operations with a backup power circuit during a power failure. By utilising SLC NAND flash memory and Advanced Wear Leveling technology, the ATP Industrial Grade CFast has higher program/write endurance and a longer product life span.
The produce line implements ECC (Error Correction Code) and AutoRefresh technologies, which correct and monitor the error bit levels to ensure data integrity. Incorporating the S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) function, users are able to monitor various parameters of endurance and reliability. This information helps to predict storage failure with preventative action.
ATP PowerProtector technology guarantees reliable controller and lasting NAND flash operation with a back power circuit during a power outage. The standalone design of PowerProtector ensures a sufficient amount of backup power during any power abnormalities such as unstable voltages.
Current status: Available
- Capacity: 16GB~128GB
- MLC (Multi Level Cell) NAND flash memory
- Operating temperature: 0℃to 70℃ and -40°C – 85°C
- Maximum performance: Sequential read up to 440MB/s, sequential write up to 80MB/s
- SATA 6.0Gbps interface and backward compatible with 1.5Gbps and SATA 3Gbps interface rate
- 24-pin connector: 7-pin signal connector and 17-pin power and control connector
- Hardware BCH ECC, correct up to 60-bit ECC per 1024 bytes of data
- SMART function support by ATA CMD
- Enhanced endurance by Global wear-leveling
|Capacity||Standard Temp 0°C – 70°C|
The ATP CFast (MLC) card is fully compliant with CFA CFast specification version 2.0 with a SATA 6Gb/s interface. The CFast card contains a 24-pin connector consisting of a SATA compatible 7-pin signal connector and a 17-pin power and control connector.