Innodisk 3MG2-P M.2 AES (S80) (MLC)

Innodisk M.2 (S80) 3MG2-P is designed as the standard M.2 form factor with SATA interface, and supports SATA III standard (6.0Gb/s) with excellent performance. The form factor refers to the M.2(NGFF) specification which established by JEDEC. Regarding of mechanical interference, Innodisk M.2 (S80) 3MG2-P absolutely replaces the traditional hard disk and makes personal computer, in any field, smaller and easier.

Innodisk M.2 (S80) 3MG2-P effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device

Current status: Available

Technical features

Data Integrity
Data Integrity
Encrypted
Encrypted
MLC
MLC
Power Failure Protection
Power Failure Protection
Secure Erase
Secure Erase
Shock and Vibration
Shock and Vibration
Supply Longevity
Supply Longevity

Related services

Conformal Coating
Conformal Coating
Content Upload
Content Upload
Controlled BOM
Controlled BOM
Customisation
Customisation
Just In Time
Just In Time
Obsolesence Management
Obsolesence Management

The Innodisk M.2 (S80) 3MG2-P effectively reduces the booting time of  the operating system and the power consumption is less than hard disk drive (HDD). No additional drives are required and can be configured as a boot device or data storage device. The 3MG2-P has 256-bit hardware based encryption as standard ensuring data is kept secure at all times.

NAND Flash

Capacity

, , , , , ,

Interface

Form Factor

Operating Temperature

,

Power Protection

Max Sequential Read / Write

Connector

Max Power Consumption

DRAM Buffer

TRIM

ATA Security

S.M.A.R.T

Dimensions in mm (W x L x H)

Environmental

, , ,

Certifications

, , ,

Warranty

Product Enquiry

– SATA III solution for industrial field
– Hardware-based AES 256bits key
– Compliant with TCG OPAL 2.0
– Complaint with IEEE 1667
– Intelligent error recovery system
– Excellent data transfer speed
-iSMART disk health monitoring

Capacity Standard Temp (0°C to +70°C)  Industrial Temp. (-40°C to +85°C)
32GB DGM28-32GD82BWBDC
64GB DGM28-64GD82BCBQCP DGM28-64GD82BWBQC
    DGM28-64GD82BWBQCP
128GB DGM28-A28D82BCBQCP DGM28-A28D82BWBQC
    DGM28-A28D82BWBQCP
256GB DGM28-B56D82BCBQCP DGM28-B56D82BWBQC
    DGM28-B56D82BWBQCP
512GB DGM28-C12D82BCBQCP DGM28-C12D82BWBQC
    DGM28-C12D82BWBQCP
1TB DGM28-01TD82BWBQC